Posted   by 

Compatible USB Port Mouse Driver



Charge mouse battery: Connect one end of the provided charging cable to the USB-C port on the mouse and the other end to a USB power source. A minimum of 3 minutes charging gives you enough power for a full day of use. Depending on how you use the mouse, a full charge can last up to 70 days. Connect the USB cable coming from the mouse to one of the USB ports (shown right) on the back or side of your computer. If you are using a USB port hub, connect the mouse cable to that. After the mouse is connected, the computer should automatically install the drivers and provide basic functionality. USB Hubs (ABM001EU) Targus Retractable Laser Mouse and Travel Hub. (ACH105EU) Targus Hub For Mac (ACH111EU) Targus 4-Port Mobile USB Hub (ACH112EU) Targus 4-Port Smart USB Hub (ACH62EU) Discontinued -Targus USB 2.0 Hub with Swivel.

One of the wonderful things about USB has been backwards compatibility. You can take a USB 1.1 device like a mouse from 15 years ago, plug into any computer today, and it will work.

The new USB Type C connector (USB-C) changes things around in terms of physical compatibility — you can’t just plug old devices into the new, smaller “Type C” port.

But all the wiring is there for full backward compatibility with no performance or functionality lost. It just takes a simple cable to convert the size of the connectors. The new Plugable USBC-AF3 is a high quality version of this kind of cable.

So if you have a new 2015 MacBook, 2015 Chromebook Pixel 2, or any of the other coming flood of USB-C devices, this cable will let your older USB “A” device work with it. As always, just let us know if you have any questions, we’re happy to help.

Compatible usb port mouse driver windows 7

Where to buy

Please enable JavaScript to view the comments powered by Disqus.

Today, almost all wired and wireless mice use USB as the interface to the computer. However, older computers may utilize PS/2 or serial ports. If your mouse is wireless, it can be communicating over Bluetooth, RF (radio frequency), or IR (infrared). To proceed, select your connection type from the following list and follow the instructions to connect and install a mouse on a Windows or Mac computer.

Tip

If you want to disconnect a mouse from a computer, do the opposite of the steps provided on this page.

Connecting a wireless USB mouse

A cordless mouse has a small receiver that communicates with the mouse. The receiver connects to the computer via a USB port.

  1. Look for a USB port in the back or on the side of your computer and plug in the receiver.

Compatible USB Port Mouse Driver

Tip

If you are unsure what a USB port looks like, there is an example image in the next section.

  1. Once the wireless receiver is connected to the computer, Windows or macOS should automatically find and install the appropriate drivers. Depending on the mouse brand, your computer may need to connect to the Internet to automatically install the drivers.
  2. Make sure there are batteries in the mouse or that it is charged.
  3. Next, verify that the mouse is turn on. Many wireless devices have an on and off switch on the bottom of them.
Note

If the mouse you want to change how any special buttons work, additional software may need to be installed. If the mouse is not functioning, see our mouse troubleshooting section.

Connecting a wired USB mouse

Connect the USB cable coming from the mouse to one of the USB ports (shown right) on the back or side of your computer. If you are using a USB port hub, connect the mouse cable to that.

After the mouse is connected, the computer should automatically install the drivers and provide basic functionality. If the mouse you want to change how any special buttons work, additional software may need to be installed.

If the mouse is not functioning, see our mouse troubleshooting section.

Connecting a Bluetooth mouse

A Bluetooth mouse connects to a computer wirelessly using a Bluetooth signal. The computer must have built-in Bluetooth or have a Bluetooth adapter connected to it.

To connect a Bluetooth mouse to your computer, follow the steps below.

  1. Open the Bluetooth utility on your computer and make sure Bluetooth is turned on. The Bluetooth utility, if enabled, is found in the notification area, with an icon that looks like the Bluetooth symbol.
  2. Turn on the mouse if it has an On/Off switch. Check the Bluetooth utility to see if it detects the Bluetooth mouse.
  3. When the Bluetooth utility finds the Bluetooth mouse, select the mouse in the Bluetooth device list and click the Pair button.
  4. If successful, the mouse connects to the computer.
Tip

If the Bluetooth utility does not detect the Bluetooth mouse, check the bottom of the mouse or inside the battery compartment for a small button. If found, press the button, as it may be required for the mouse to be discoverable by the computer. If no button is found and the mouse came with a software installation disc, install the mouse software on the computer. After installing, check the Bluetooth utility to see if it detects the Bluetooth mouse.

Connecting a PS/2 mouse

Note

Before connecting or disconnecting the PS/2 mouse, make sure the computer is turned off.

Connect the cable coming from the mouse to the green-colored PS/2 port (shown right) on the back of the computer. If your PS/2 ports are not color-coded, the mouse port is the furthest port from the left side of computer chassis (when viewed from the back).

After the mouse is connected, the computer should automatically install the drivers and provide basic functionality. If the mouse you want to change how any special buttons work, additional software may need to be installed. If the mouse is not functioning, see our mouse troubleshooting section.

Connecting a serial mouse

Note

When connecting or disconnecting a serial mouse, make sure the computer is turned off.

Connect the mouse to the serial port on the back of the computer. If you have more than one serial port on the computer, we recommend connecting the mouse to the first port. Once connected, depending on your computer setup, you may need to configure the mouse COM ports in BIOS setup.

Today, most computers no longer have serial ports. Most serial mice are specialized, so to use one, you need to install the software included with the mouse, or from the mouse manufacturer's website.

Tip

If you're having problems connecting a serial mouse because the computer has no serial port or the port is not working, consider using a serial to USB adapter.

BIOS setup

If you have an older computer (2005 or earlier) with a serial or USB mouse, it may be necessary to configure the ports in BIOS setup. If you have a newer computer, this section can be skipped.

Older computers with serial mice

If you're using a serial mouse and it's not detected, verify that the serial ports or COM ports are enabled and properly assigned in BIOS.

Older computers with USB

If the mouse connects via USB, make sure USB is enabled and if available, also ensure that the USB legacy support is enabled. USB legacy support allows the mouse to work in legacy mode, for example, DOS.

Mouse troubleshooting

If your mouse is not working after following the steps above, additional troubleshooting may be required.

  • Mouse and touchpad help and support.

Compatible Usb Port Mouse Driver Windows 10

Additional information

Compatible Usb Port Mouse Driver Updater

  • See the mouse, PS/2, serial port, and USB definitions for further information and related links.